The Ultra-Performance Euro-Style VHOR
                             and HOR Tanning Lamps from Voltarc.

"Provides the Answer to Tanning Customers Looking
for a Deeper Darker UVA Tan"

 

Available in:

 

Lamp Dimensions (Min - Max):

Lamp Model                    FR59              FR71                 FR72                   FR73          
BF-BF (mm):                   
1495.3-1500.1  1759.0-1763-8     1754.9-1759.7      1780.4-1785.2     
Pin-Pin (mm):                 
1509.5-1514.3  1773.2-1778.0      N/A                    N/A            
Boss-Boss (mm):               N/A                 N/A                   1770.8-1775.6      1796.3-1801.1 

Lamp Diameter (nom)        38.1mm          38.1mm             38.1mm               38.1mm    
Base:                               
Bi-Pin            Bi-Pin                RDC                     RDC          
Base Color:                      
Antique          Antique              Antique               Antique
                                      
Bronze           Bronze               Bronze                Bronze

Electrical Data Nominal Data (nominal values):
Lamp Model                     
FR59                    FR71                  FR72                  FR73
Lamp Wattage's:                
85/140                 100/160-200        100/160              100/160       
Lamp Current (mA):           
870/1500              1000/1870-2300   1000/2100           1000/2100
Lamp Voltage (V):             
100/115                120/95                120/85                120/85  
Operating Mode:               
Preheat                Preheat               Rapid Start         Rapid Start 

Relative Spectral Output for VHOR

Tips WB00678_.GIF (615 bytes)

Monitor your lamp intensity. Purchase a UV meter and develop a history of UV readings. Check your lamps both with and without acrylics so you can follow the degradation of the acrylics. Also periodically check the lamp intensity so you can monitor the depreciation of the lamps during use. Keep in mind that most meters can be used to compare lamps with different spectral properties. Generally lamps are replaced at about a 35% loss from their initial intensity. This will vary by lamp design and power loading.

Periodically check lamp cleanliness. Most units have an air cooling system for the lamps, which ends up being a giant vacuum cleaner for room dirt. A dirt buildup on the lamps can have a significant effect on lamp intensity.

CAUTION: Follow Sunlamp Instructions!

Ultraviolet Radiation  bd21335_.gif (971 bytes)  Contains Mercury

 

Compatibility Sheets

GTX HO Bronze

GTX VHO Bronze+

 

1-888-VOLT-ARC