SST Series color .JPG (56064 bytes)

"Super-Swirl" Technology with Dual Phosphors.

"Eliminates the Added Cost and Need                        
for HP Facial and T5 Spaghetti Lamps"

  • Professional dual performance level tanning lamps that deliver stronger facial tanning for the ultimate balanced tan
  • 21" facial area - Super Swirl Energy focusing shape
  • Internal 180° reflector available on ALL lamp models
  • Propriety Rotonic ™ coating/phosphor system
        100 watts = 1000 hours (effective tanning life)
        165 watts = 700 hours (effective tanning life)

GTX & SST chart 1.jpg (83079 bytes)

Available in:

  • UVB % Index (dual phosphor system):
            USA: 6.5/5.0, 7.5/6.5
            Europe: 3.5/3.20, 4.6/3.5
  • Lamp Color: Blue Hue
  • Standard Lamp Lengths : F71, F72 and F73
  • Wattage: 100W and 165W
  • Base Color: Royal Purple

All Materials used to make SST Series tanning lamps are of
a proprietary premium grade to produce superior quality lamps
that generate cost savings over high priced HP and T5 spaghetti lamp systems.

blesepa.gif (1971 bytes)

 

SST Series rgb.jpg (1736892 bytes)

 

Lamp Dimensions (Min - Max):
Lamp Model F71 F72 F73
BF-BF (mm): 1759.0-1763-8 1754.9-1759.7 1780.4-1785.2
Pin-Pin (mm): 1773.2-1778.0 N/A N/A
Boss-Boss (mm): N/A 1770.8-1775.6 1796.3-1801.1
Lamp Diameter (nom) 38.1mm 38.1mm 38.1mm
Bases: Bi-Pin RDC RDC
Base Color: Royal Purple Royal Purple Royal Purple
 

blesepa.gif (1971 bytes)

 

Electrical Data Nominal Data (nominal values):
Lamp Model F71 F72 F73
Lamp Wattage's: 100/165 100/165 100/165
Lamp Current (mA): 1000/1870 1000/2100 1000/2100
Lamp Voltage (V): 120/95 120/85 120/85
Operating Mode: Preheat Rapid Start Rapid Start

  Relative Spectral Output

SPD Chart SST Series.jpg (284462 bytes)

WB00678_.GIF (615 bytes)

Tips

Inadequate lamp cooling and worn out starters contribute to "End Darkening", so it is recommended that you replace the starters every other lamp replacement.
Slow tanning/ not tanning - old acrylic may filter out a significant amount of ultraviolet. Use a U.V. Meter, check the output through new acrylic and again through the old acrylic. If a significant difference is noted, replace the old acrylic.

CAUTION: Follow Sunlamp Instructions!

Ultraviolet Radiation  bd21335_.gif (971 bytes)  Contains Mercury

Compatibility Sheets

3.0 - 2.6 5.0 6.5 - 5.0 HO
Reflector
7.5 - 6.5 HO
Reflector
6.5 - 5.0 HO
Non-Reflector
7.5 - 6.5 HO
Non-Reflector
SST HOT SST TWIN 6.5 - 5.0 VHO 7.5 - 6.5 VHO

1-866-VTI-LAMP

 


enote.gif (10305 bytes) customer.service@voltarc.com

Voltarc Technologies, Inc.
© 2002 All rights reserved