The Ultra-Performance Euro-Style VHOR
                                     tanning lamps from Voltarc.

“Provides the Answer to Tanning Customers
Looking for a Deeper Darker UVA Tan”

bulletDuro-Coat™ tuned UVA-UVB phosphor blend- focused UV energy for ultimate tanning power
bulletInternal 220° reflector available on ALL lamp models
bulletPropriety Rotonic ™ coating/phosphor system
   VHOR = 160 OR 200 watts = 800 hours (effective tanning life)

GTX Bronze chart 1.jpg (64290 bytes)

Available in:

bulletUVB % Index (dual phosphor system):
        USA: 140W and 160/200 W: 3.13
        Europe:140W and 160/200W: 1.88
bulletLamp Color: Blue Hue
bulletStandard Lamp Lengths : F59, F71, F72 and F73
bulletWattage: 140W and 160/200W
bulletBase Color: Antique Bronze

All Materials used to make GTX Bronze Plus Series tanning lamps are
of a proprietary premium grade to produce a deeper darker UVA tan
that your customers will love!

blesepa.gif (1971 bytes)

 

Lamp Dimensions (Min - Max):
Lamp Model F59 F71 F72 F73
BF-BF (mm): 1495.3-1500.1 1759.0-1763-8 1754.9-1759.7 1780.4-1785.2
Pin-Pin (mm): 1509.5-1514.3 1773.2-1778.0 N/A N/A
Boss-Boss (mm): N/A N/A 1770.8-1775.6 1796.3-1801.1
Lamp Diameter (nom) 38.1mm 38.1mm 38.1mm 38.1mm
Bases: Bi-Pin Bi-Pin RDC RDC
Base Color: Antique Bronze Antique Bronze Antique Bronze Antique Bronze
 

blesepa.gif (1971 bytes)

 

Electrical Data Nominal Data (nominal values):
Lamp Model F59 F71 F72 F73
Lamp Wattage's: 140 160-200 160 160
Lamp Current (mA): 1500 1870-2300 2100 2100
Lamp Voltage (V): 115 95 85 85
Operating Mode: Preheat Preheat Rapid Start Rapid Start

Relative Spectral Output for VHOR

SPD Chart GTX Bronze.jpg (288140 bytes)

WB00678_.GIF (615 bytes)

Tips

Monitor your lamp intensity. Purchase a UV meter and develop a history of UV readings. Check your lamps both with and without acrylics so you can follow the degradation of the acrylics. Also periodically check the lamp intensity so you can monitor the depreciation of the lamps during use. Keep in mind that most meters can be used to compare lamps with different spectral properties. Generally lamps are replaced at about a 35% loss from their initial intensity. This will vary by lamp design and power loading.
Periodically check lamp cleanliness. Most units have an air cooling system for the lamps, which ends up being a giant vacuum cleaner for room dirt. A dirt buildup on the lamps can have a significant effect on lamp intensity.

CAUTION: Follow Sunlamp Instructions!

Ultraviolet Radiation  bd21335_.gif (971 bytes)  Contains Mercury

GTXBronzeUserButtonV2.jpg (22644 bytes)

 

1-866-VTI-LAMP

 

horizontal rule

enote.gif (10305 bytes) customer.service@voltarc.com

Voltarc Technologies, Inc.
© 2002 All rights reserved