 |
The
Original Standard by Which all Tanning Lamps are Measured! |
"Proven
Lamp Technology Field-Tested By Millions of Users" |
 | Extremely cost competitive against all
competitors brand where price is the driving issue |
|
 | Internal 180° reflector available on ALL lamp
models |
|
 | Propriety Rotonic coating/phosphor
system
100 watts = 800 hours (effective tanning life)
165 watts = 500 hours (effective tanning life) |
|

Available in:
 | UVB % Index (dual phosphor system):
USA: 2.6, 4.2, 5.0, 6.5, 7.0, 7.5, and 8.5
Europe: 2.0, 2.6, 3.2, 3.6, 4.1, 4.3 and 4.7
|
 | Lamp Color: Pink Hue |
 | Standard Lamp Lengths : F59, F71, F72 and F73 |
 | Wattage: 85W, 100W, 140W and 165W |
 | Base Color: Metallic Silver |
All Materials used to make
Voltarc Classic Series tanning lamps are of a cost
effectiveness grade to produce lamps at a low initial price without
sacrificing quality and performance

 |
| Lamp Dimensions (Min - Max): |
| Lamp Model |
F59 |
F71 |
F72 |
F73 |
| BF-BF (mm): |
1495.3-1500.1 |
1759.0-1763-8 |
1754.9-1759.7 |
1780.4-1785.2 |
| Pin-Pin (mm): |
1509.5-1514.3 |
1773.2-1778.0 |
N/A |
N/A |
| Boss-Boss (mm): |
N/A |
N/A |
1770.8-1775.6 |
1796.3-1801.1 |
|
| Lamp Diameter (nom) |
38.1mm |
38.1mm |
38.1mm |
38.1mm |
| Bases: |
Bi-Pin |
Bi-Pin |
RDC |
RDC |
| Base Color: |
Metallic Silver |
Metallic Silver |
Metallic Silver |
Metallic Silver |
|
|
|
|
|
| 
|
|
|
|
|
|
| Electrical Data Nominal Data (nominal
values): |
| Lamp Model |
F59 |
F71 |
F72 |
F73 |
| Lamp Wattage's: |
85/140 |
100/165 |
100/165 |
100/165 |
| Lamp Current (mA): |
870/1500 |
1000/1870 |
1000/2100 |
1000/2100 |
| Lamp Voltage (V): |
100/115 |
120/95 |
120/85 |
120/85 |
| Operating Mode: |
Preheat |
Preheat |
Rapid Start |
Rapid Start |
|
|
|
|
|
Relative Spectral Output


Tips |
Check the acrylic quality. Poor quality, "cheap"
acrylics, or badly degraded acrylics can block 70% or more of the UVB radiation of the
lamps from reaching your skin. This can make a new lamp appear to perform like one that
has reached end-of-life. |
| Check the lamp sockets. Be sure that the lamps are snug in the
lamp sockets. Replace any which show worn springs or loose contacts. Poor lamp contacts
can cause difficulty in lamp starting, shorten lamp life caused premature end blacking and
possibly electrical arcing at lamp ends. |
CAUTION: Follow Sunlamp Instructions!
Ultraviolet Radiation
Contains
Mercury
Compatibility Sheets
1-800-624-9646
|