Hyde® Neon Fabrication

P/N: 12148, Rotary Air Blower with Motor 5400 CFH 1 phase

P/N: 12149, Rotary Air Blower with Motor 5400 CFH 3 phase

1214.12149.tif (1861532 bytes)

bulletMaximum flow: 127SCFM
bulletMaximum pressure: 65 IWG
bulletMaximum vacuum: 4.3" Hg (58.5 IWG)
bulletCast aluminum blow housing,
impeller & cover;
cast iron flanges (threaded)
bulletUL & CSA approved motor
with permanently sealed ball bearings
bulletInlet & outlet internal muffling
bulletQuiet operation within OSHA standards

 

1214.12149chart.tif (2990071 bytes)

Specifications:
Model: 12148 12149
Motor Enclosure- Shaft Material: TEFC-CS TEFC-CS
Horsepower:

1.5

 1.5
Voltage:1

115/230

 230/460
Phase- Frequency:1 Single
50/60 Hz		 Three
50/60 Hz
Insulation Class:2

F

 F
NEMA Rated Motor Amp:

15.6/7.8

 4.6/2.3
Service Factor:

1.15

 1.15
Inrush Amps:

84/42

 32/16
Max. Blower Amps:3

19/9.5

 6.2/3.1
Recommended NEMA Starter Size:

1/0

 0/0
Shipping Weight lbs.(kg):

76 (35)

71 (32)
1Motors are designed to handle a broad range of world voltages and power supply variation. Dual voltage 3 phase motors are factory tested and certified to operate on both 208-230/415/460 VAC-3 ph-60 Hz and 190-208/380/415 VAC-3 ph-50 Hz. 1 phase motor, 104-115/208-230 VAC-1 ph 60 Hz and 100-110/200-220 VAC-1ph-50 Hz. All voltages above can handle a ±10% fluctuation.

2 Maximum operating temperature: motor winding temperature (winding rise plus ambient) should not exceed 140°C for Class F rated motors or 120°C for Class B rated motors. Blower outlet air temperature should not exceed 140°C (air temperature rise plus inlet temperature). Performance curve maximum pressure and suction points are based on a 40°C inlet and ambient temperature.

3 Maximum blower amps corresponds to the performance point at which the motor or blower temperature rise with a 40°C inlet and/or ambient temperature reaches the maximum operating temperature. 

Specifications are subject to change with out notice.

1214.12149dia.tif (3678168 bytes)